Why Choose Us

There are a few ways you can lower your bill, first off the least expensive and most user-friendly would be investing in LEDs for your current fixtures. Next would be balancing of your electric panel, if you have excessive single pole loads pulling on one hot leg of your panel it can drive up your bill due to heat and the meter reading the higher of the 2 legs. Last but not least would be addressing corrosion in your panel, if your panel has rust along the bottom that can indicate a corroded panel because the rust along the bottom is from water draining from the inside of the panel itself.

This could be a couple of conditions, if the flickering is just for a split second such as a fast, minor dimming when a load such as an AC or electric dryer is started, then odds are it's nothing to worry about. Assuming they are constantly flickering around the home or in a certain room when a small load is applied or nothing at all, this could be due to a failing connection due to heat or not being tightened properly and should be addressed as soon as possible. Electricity always gives warning signs before complete failure and this could be one of them.

It is always recommended to contact a certified and qualified professional to perform service and repairs on electrical systems.

Smoke detectors beep for multiple reasons, most commonly the battery is in need of replacement, other reasons may include smoke detector replacement due to old age as the units to malfunction as they age. Smoke detectors should be replaced every 15 years regardless if they are still functional to keep home fire safety to a maximum.

Estimates are always free! For service, repairs, replacements, and new projects, the task will be thoroughly examined and multiple prices will be built and be presented for you to make a decision. Typically for a diagnosis you will get a repair and replacement option, if there is more options for replacement or repairs, they will be on the list of solutions presented to you.